To configure a Windows NT computer, you first need to create a new Internet dialer. To do this, from the main screen, double click:

My Computer -> Dial-Up Networking

Click 'New'

Name the new phonebook entry: TCQ Internet

Click Next

Check the boxes "I am calling the Internet" and "Send my plain text password if that's the only way to connect."

Click Next

In the Phone number field, enter the Dial-Up access number found in the Call Finder for your area, including area code. 

Click Next

Select Point-to-Pont Protocol (PPP)

Click Next

For Login Script, select 'None'

Click Next

'My IP Address' should be set to 0 0.0.0.0, we will assign this to you when you login.

Click Next. 

Set DNS server and WINS server addresses to 0.0.0.0

Click Next. Click Finish

Your Dialer is created. Now, some minor changes will be needed. Click the box labeled 'More' and select 'Edit Entry and Modem Properties'

Click Configure

Make sure that the Initial speed rate is set for 115200 and that 'Enable hard flow control' is selected.

Click OK

Now click Server. Make sure only TCQ/IP is checked.

Click TCP/IP Settings

Make sure that 'Server Assigned name and server addresses'  is selected, and that 'Use IP header compression' and 'Use default gateway on remote network' are checked. 

Click OK. 

Select Script, and check None. 

Select Security, click 'Accept any authentication including clear text'

Click X.25

In the box labeled Network, select None. 

Click OK

Click Dial

In the field labeled 'User Name', enter: username@tcq.net

(Replace 'username' with your assigned username)

Enter your assigned password. 

Make sure the box labeled 'Domain' is left blank.

Click OK to connect. 

Once you have connected, you can begin using your Internet programs.